Thermal treatment of plastics
Our heat technology enables manufacturers to always create exactly the same processing and production conditions, in order to reliably achieve constant product quality.
Our heat technology enables manufacturers to always create exactly the same processing and production conditions, in order to reliably achieve constant product quality.
To deliver higher performance with reduced fuel consumption and lower emissions, the weight of cars must be reduced. The key to this is bre-reinforced plastics, such as have been used up to now exclusively in racing cars.
90 years ago, Ernst Vötsch founded his company for manufacturing refrigerated displays in Berlin…
In particular, many electrical components have to be permanently water- tight, as they must work reliably even under the most adverse weather conditions. Test a wide variety of test specimens as to their tightness.
In many manufacturing stages, heat processes play a central role. We supply a wide range of CQI-9-compliant temperature-controlled production systems for car manufacturers and their suppliers.
Many heating processes can be optimized with our tailormade infrared modules.
Alternative drive systems are a central component of the automotive future. We work together with you to exactly tailor our li-lo test systems of the weisstechnik® and vötschtechnik® brands to your test conditions.
Special test systems are required to test the durability of electric motors and generators under different environmental conditions. Models of WeissTechnik and VötschTechnik.
Avoid malfunctioning development and minimize claims within warranty period. By performing our tests, we provide support to the R&D activities of our customers in the following fields.
On request, we will equip your Test Chamber with explosion protection or an irradiation unit. Integration of further parameters is also possible – contact us!
The precision climate test cabinets offer all of the benefits of the tried and tested ClimeEvent series, and use a variety of technical measures to achieve the required level of precision.
With our temperature shock test cabinet, extremely rapid temperature changes in the range from -80 °C to +220 °C can be implemented. This allows you to reduce the incidence of early failures and increase the reliability of your products.
For manufacturers of electronic components, it is particularly important that their products are protected against electrostatic discharge in the best possible way. ESD options are available in the LabEvent, ClimeEvent and ShockEvent series.
Our new products do not only comply with the current regulations, but can be used for their entire product life without retrofits – of course with the same performance.
A series is the “new standard” in vibration testing, with a solid test performance. – A22/SA2HAM and A22/EM2HAM. Test systems provides a maximum of 3.5m/s shock velocity testing.
A series is the “new standard” in vibration testing, with a solid test performance. – A12/SA1HAM and A12/EM1HAM. A series gives good balance between specification of velocity, acceleration and displacement.
In projects with Airbus Helicopters, DLR and GKN Aerospace, our experience in building special systems was the decisive factor. – Heating chambers, VTU 560/400/400-150°.
With a closed floor element the ShakeEvent test cabinets can be used as fully functional temperature testing chambers and, additionally, as climate test cabinets as well as for ESS testing.
What is explosion protection and when is it required? When must test systems be designed in accordance with ATEX directives? These are just some of the questions asked by our customers.
Production and quality assurance have finally entered the digital age with Industry 4.0. The SIMPATI software package was developed specially for use in simulation systems, drying and heating cabinets and furnaces.
By way of the so-called Fape test, the subsequent formaldehyde emission from construction materials can be detected and its concentration can be determined.
Amtest has developed a quality management system that complies with the specifications of the ISO 9001:2015 standard as applied to the full scope of our business.
Specific requirements have to be fulfilled in the manufacture of plastic products. Together with our customers, we have developed the necessary effective solutions: Uniform tempering of bulk goods
Sterilisers of Vötsch Technik comply with the DIN EN ISO 20857:2013 standard Hot Air Sterilisers for Cleanroom Classes ISO 5 and ISO 7 acc. DIN EN ISO 14644-1
Bricks, clinker bricks, stone or tiles are often exposed to wind and weather for decades without protection. In order to guarantee long-term quality and to permanently protect buildings, the materials are subject to intenssive temperature tests.
Testing aerospace equipment before the first flight into space is a requirement in order to be able to predict the behavior of these valuable components. They are tested by simulating space conditions.
The SNOL produce heat treatment equipment for laboratory and industrial applications. The company pays particular attention to the product development by using advanced technologies and scientific progresses in order to meet individual user needs.
Low temperature test cabinets from weisstechnik achieve a fast change in temperature and a high degree of homogeneity both in small cabinets and large walk-in chambers.
Microchip Technology Inc. is a leading provider of microcontroller, analog, memory and Flash-IP solutions, providing low-risk product development, lower system cost and faster time to market for thousands of diverse customer applications worldwide.
Electronica, the World's Leading Trade Fair for Electronic Components, Systems and Applications. The entire electronics universe at a single location. Messe München, Germany, November 13-16, 2018
ClimeEvent makes testing even more reliable, environmentally-friendly and easy to service. A new refrigerant matches compatibility with future requirements. Optimised air guidance delivers the best-in-class performance. Tests can be programmed.
IMV has developed super-long life amplifiers with Integrated Shaker Manager technology which; minimizes the required electric power, cuts down electric consumption, reduce blower noise if air-cooled type shakers and have significant reliability.
The company designs and manufactures specialized technologically advanced thermal processing equipment of varying complexity based on customers’ requirements.
Aaircraft must resist extreme temperature fluctuations and humidities in vacuums. It is therefore important to test these highly stressed components for quality and durability before use.
Using the WT/WK-OZ test cabinets you can find out the ozone resistance of your products. For this purpose, the product is subjected to an ozone concentration of 25 to 200pphm at +40°C and 55% relative humidity.
With the weisstechnik corrosion chambers with recirculating air and alternating climate control SaltEvent SC / UKWT, you can simulate the effect of salt spray, condensation, and standard climates – individually, combined, and automatically.
Highly accurate laboratory electric furnaces with chambers made of thermal insulation fiber plates. The products are designed for hardening, loosening, normalizing and other thermal processing up to temperature of 1600°C.
Highly accurate laboratory electric furnaces with solid ceramic chambers. The products are designed for hardening, loosening, normalizing and other thermal processing to a temperature of 1300°C.
Tests to stabilize and optimize the quality of products are indispensable in research and laboratories. Our test chambers were designed for this purpose in particular and allow reproducible temperature and climatic tests directly at the workplace.
SNOL ashing furnaces are designed for ashing and burn off processes. Ashing process is available in temperature scale of 900-1300°C.
The test chambers with an extra wide or high interior test space allow you to test for suitability and service life with temperature changes, moisture/frost or moisture/heat constellations according to IEC 61713, IEC 61215 and IEC 61464.
SNOL protective atmosphere oven, designed for protection of oxidation process of various metals in up to 300°C temperature. The product can be used in scientific laboratories, educational institutions, medicine and industry.
Staggered simulations of natural weathering in devices always requires a restriction of the number of climate values or their cyclic alterations. The Global-UV test unit simulates the most important climate factors which are relevant for ageing.
High temperature horizontal tube furnaces designed for thermal processing up to a temperature of 1250°C. The products can be used in scientific laboratories, educational institutions, medicine and industry.
Top- loading high temperature electric laboratory furnaces are designed for drying, preliminary heating, hardening, loosening, normalizing and other thermal processing up to temperature of 900°C.
The particularly robust VC3 test chambers create more productive, comfortable and clear thermical tests for a great number of products. Max. temperature (+)180°C, min. temperature (-)70°C, condenser – air-cooled.
TempEvent temperature test chamber, the world first from weisstechnik, is setting standards in the fields of performance, future-proofing and usability. New, eco-friendly refrigerant R449A, optimized airflow and temperature distribution.
Everyday items, cosmetics, electronical components and medical products must fulfill certain quality standards. The temperature test chambers of the LabEvent series allow you to conduct ideal temperature tests for smaller test specimens.
IMV’s Direct Coupling top cover can work with any test chamber.
The TensileEvent series of climate chambers for material test rigs distinguishes itself by adding an additional dimension to the climate control. Humidification using an efficient system developed by Weiss ensures precise control.
The temperature chambers in the TensileEvent series for material test rigs are characterized by an individual cooling system or by a cascade cooling system in which the refrigerant does not interact with the surroundings.
High temperature furnaces are suitable for melting aluminium, zinc, copper, bronze, and other base metals.
The Spiders are equipped with a Digital Signal Processor containing a fully uploaded algorithm. This enables the Spider to operate independently without support from a host PC.
High accuracy laboratory electric furnaces with ber-insulated chambers, that are designed for hardening, loosening, normalizing and other thermal processing up to a temperature of 1100°C or 1300°C.
High-accuracy industrial electric furnaces are suitable for hardening, stress relieving, normalizing, and other thermal treatment processes up to 1300°C.
Firm structured furnaces with a removable hearth for a more comfortable loading are used for thermal processing of various types of materials up to 1300°C.
SENSOR+TEST is the leading forum for sensors, measuring and testing technologies worldwide. Nürnberg Exhibition Centre, Germany, 26.-28.6.2018
5 / 6 / 7 June 2018, Halls 8 + 10, Messe Stuttgart, Germany - Automotive Testing Expo Europe - Bigger and better, with more new technology than ever before!
Customers wishing to take advantage of the ECO technology offered by IMV are able to upgrade their equipment through the ECO Replacement amplifier program.
The automotive world is on the verge of major changes. Global challenges such as traffic jams, the depletion of fossil fuels and the greenhouse effect make it necessary for companies to cooperate internationally and cross-sectoral.
LabEvent – For development and production processes of materials or electronic components they have to be tested under realistic temperature conditions to determine possible weaknesses or ageing-induced damages in advance.
Electromagnetic compatibility (EMC) is defined as the ability of an electrical device to work satisfying in its electromagnetic environment (interference susceptibility) and with no influence on its environment in an impermissible manner.
The particularly robust VC3 test chambers create more productive, comfortable and clear thermical tests for a great number of products.
In the manufacture of machine parts, absolute measurement accuracy and precision are vital. Both during the manufacturing process and in quality management, close and exact control measurements of the products are needed.
Hybrid structures in various materials are used for lightweight design concepts in vehicle construction. Differences in their thermal expansion coefficients can present a risk.
In order to optimally reproduce the vehicle architecture, we offer integrated or modular conditioning units on the basis of conventional or alternative refrigerants.
The VTUT chest oven from Vötsch is particularly suitable for top loading of heavy and large components of up to 8t of weight, 10m length and 1,8m diameter.
Seasonal differences, different climate zones – your products have to withstand various thermal and climatic conditions during manufacturing, transport, storage and use. – Test chambers WK3, VC3, WKS3, VCS3
In 2016 the number of electric cars on the planet topped 2 million, with sales leaping 60% on the previous year.
The vibration test chambers WT3-V and WK3-V series will enable you to simulate dynamic processes as well as the associated combined mechanical and thermal / climatic stresses that act on components and devices.
Thanks to the sophisticated construction and high quality workmanship, the test chambers type TS / VT3 have excellent temperature consistency and in this way, they guarantee correct and reliable results.
For the vibration test systems, the vibration generators correspond to the loud speakers of the audio systems. They have the vibration controllers instead of the sound source to drive the vibration generators.
Business results and future projects were discussed by IMV staff, Amtest-TM and 44 distributors from all over Europe at a conference in Bergamo, Italy, in mid-October.
Standard heating and temperature ovens for coating materials to be used in manufacturing. Continuous oven systems for flammable material.
With our SC 1000/15-60 and SC 2400/15-60 IU climate change corrosion test chambers, you can carry out climate change tests in accordance with VDA 233-102, thereby meeting the quality standards set for the products.
For temperature controlling and cooling specimens on a shaker table that provides translational and rotational movement about the three spatial axes.
The Vötsch Technik continuous oven system forms a reliable part of your production line. It can be equipped with a wide variety of conveyor systems. It is particularly suitable as a component for heat treatments in automation lines.
Thanks to the modular system, the Walk-in chamber ClimeEvent can be configured quickly and easily. The wide range of options enables us to meet your individual needs.
Test equipment for highly accelerated life test and stress screen applications. The chambers are equipped with a Liquid Nitrogen (LN2) cooling system. The vibration table is a state-of-the-art, six degree-of-freedom (6DoF) tri-axial vibration table.
With emission test chamber EmissionEvent VOC, it is possible to evaluate scientific and production-technology measures for limiting emissions in car interiors.
The IMV ECO-system controls the field current between 0% and 100%, using a power converter with a control switching frequency of over 20kHz.
Reduce your carbon footprint – Upgrade your amplifier to get the complete set of benefits. Lower your noise emission. Save up to 80% on running costs. – Remote system diagnostics.
SkyEvent test chambers – Check whatever you like, from aeroplanes to helicopters, where research, development and quality control are concerned, you won’t want to take any chances. We’ll support you in that.
AirEvent – Air pollutants such as sulphur dioxide, nitrogen oxide, hydrogen sulphide and chlorine are emitted through stationary combustion in the industry, by power stations, traffic and agriculture.
In order to determine possible weaknesses or ageing-induced damages in the development and production processes of materials or electronic components in advance, they have to be tested under realistic temperature conditions – WT/VT 550/60.
New, eco-friendly refrigerant – Optimised air ow and temperature distribution – WEBSeason web-based user interface
Complete Vötsch Technik product portfolio and all Weiss Technik technology areas on one place.
Enjoy all the benefits of the newest generation by exchanging your old device! Great exchange promotion of desktop devices for temperature testing.
Vötsch Technik’s infrared system – The emission performance of the IR radiators can be optimally adjusted to the absorption properties of the product to be treated.
The Dryers and ovens HeatEvent F from Vötsch Technik meet the advanced safety requirements of EN 1539 and allow the drying and heat treatment processes to be safely controlled by limiting the amount of solvents.
The industrial ovens VTU are suitable to be used in the production of automotive engineering, aerospace and electronics products as well as to process a broad range of materials, such as glass, ceramics, plastics, metals, textiles and composites.
Due to our experience we realize that most bio reactors are used for very critical and delicate processes where mass flow controllers need to be reliable, repeatable and flexible.
With the free get red-y software, users now have PC access to all connected Vögtlin measuring and control devices. Beside displaying key information, users can also view and modify various operating parameters.
In addition to the three major test types of Sine, Random and Shock, Crystal Instruments also offers Time Waveform replication, or TWR. This is a method to exactly recreate, or replicate, a vibration in its time waveform format on a shaker system.
Environmental simulation systems manufacturer Vötsch opened its new production hall in Balingen, representing a €3 million investment by the company in the development of the site.
Wherever the going gets hot, decision makers worldwide rely on Vötsch Technik heating and drying cabinets. The world novelty HeatEvent is about to launch. Discover the many benefits and get an impression of our latest innovation.
Bigger and better, with more new technology than ever before! Automotive Testing Expo Europe will once again run at the Messe Stuttgart and will feature record numbers of exhibitors. – 20-22 June 2017, Hall 1, Stuttgart, Germany
The ESS test procedure allows for manufacturing faults detection at early stages of the production. Executing a couple of hundreds/thousands of temperature cycles allows for the prediction of the expected life span of test specimens.
Qualifications and training are essential – Our service technicians are specialists with first-class training in the areas of electrical/electronic engineering, cooling technology, control technology, mechanical engineering and software.
Weiss has been working for years in collaboration with leading process automation manufacturers, and is continually developing its control and documentation software SIMPATI.
More networking. More security. More speed. – With our additional modules for the SIMPATI control software, you can optimally adjust the conditions of use to suit your individual needs and processes.
Weiss Technik has now developed the world's first AdBlue temperature control unit for fuel-filling tests, to test its use under reproducible conditions, to gain insights relevant for series production.
Control – Quality makes the difference – Production and test engineering – Industrial trade fair, 09.05.–12.05.2017, Messe Stuttgart
The Weiss Technik Climate Test Chambers Clime Event help you to test the influence of temperature and humidity on the properties, function and lifespan of your products. Reproducible, certified and under accelerated conditions.
The Battery Day NRW presents the products, services and achievements of companies and institutions in NRW which are active in the battery technology and application market.
Since 01.01.2017 the transition period for refrigerant circuits with a charge < 3kg is expired, for this reason all refrigerant circuits with an CO2 – equivalent > 5t a leak check has to be carried out.
Document of fluorinated greenhouse gases (EU) No. 517/2014 provides information on the contents of the Regulation, its impact on operators and our current activities and recommended action.
Crystal Instruments has received the impressive honor of supplying a 64 channel data acquisition system, the Spider-80X, for testing of NASA’s James Webb Space Telescope project.
The journal Flow Control has honored the fluid handling industry’s ongoing commitment to manufacturing excellence through an annual Innovation Award for nearly two decades.
The limitations of older technology and software interfaces have become obvious. Why not upgrade to the latest Crystal Instruments vibration controller technology and enhance your testing capabilities?
Crystal instruments expandable systems – Up to 512 Channels – The Spider 80X and Spider 80Xi dynamic measurement systems
AccuBridge 6020Q – Measurement Internationals self calibrating ratio bridge. Improved accuracies, unmatched speed, proven performance.
AccuBridge 6242D – Thorough real-time measurement information and analysis – you have complete confidence in the measurement being made with the information provided.
From National Measurement Institutes to government, industrial and commercial primary labs worldwide, Measurements International bridges are the preferred choice.
Developed from the best research done by National Measurement Institutes, the measurements of MI’s bridges are unmatched by any other commercial instrumentation. MI bridges help labs attain the best accredited performance available.
Electronica 2016, The International Trade Fair for Electronic Components, Systems and Applications. The entire electronics universe at a single location. November 8 – 11, 2016, Messe München
The resistance bridge 6020T is designed specifically for thermometry applications and provides the best accuracy and convenience based on the most recent developments in current comparator technology.
Proven Performance: Not only does Measurements International offer you the technology of choice of major NMI’s and unmatched accuracy and uncertainty levels, but these capabilities have been proven many times over!
The technology described here has already been used in many sites in Japan and more widely in Asia with more than 200 installed systems. This 3-axis technology is the workhorse of the Japanese automotive industry.
Due to the great contribution to the promotion of efficient use of energy, the technology of ECO-Shaker received the Chairman's award from The Machinery Federation in 2012.
Heating oven VTU (charging trolley with rotating drums) – Application: Heat treatment of gaskets for hydraulic systems. Branch: Plastics industry. Possibilities of application: Gentle heat treatment or drying of small components while in motion.
The purpose of the non-Gaussian method is to adapt the signals used for excitation in the lab to real-life conditions as much as possible in order to obtain identical stress.
Application: curing of encapsulated electric motor coils. Branch: mechanical engineering (electric motors). Possible applications: warming-up and tempering of flat products. Charging of the oven with heavy products by means of a crane.
Environmental friendly technology from Weiss Umwelttechnik – Energy efficiency – Green Mode
Gems Sensors and Controls updates to the PS61 Pressure switch product family.
VTU 100/60/75-200°C Drawer-type oven – Drying of printed and resin-soaked pattern prints fastened to frame. – Branch: Surface technology.
IMV Corporation, the world 's leading electrodynamic vibration test systems manufacturer introducing newly launched 30kN and 60kN A series shaker in Automotive Testing Expo 2016.
Bigger and better, with more new technology than ever before! Automotive Testing Expo Europe 2016 will once again run at the Messe Stuttgart and will feature record numbers of exhibitors. (31 May – 2 June)
Innovative exponents for future industry – From Sensors to Evaluation: A Comprehensive Overview of System Expertise for Measuring, Testing, and Monitoring Tasks in all Industries – Nürnberg, Germany, 10.-12. Mai 2016
THP Systems Ltd announced the UK (Letchworth) release of the world leading A-series vibration test system product line from IMV Corporation.
IMV single axis shaker A series – Electrodynamic vibration test system – A new standard created by listening to our customers. A wider range of test requirements and higher test speciﬁcations.
Meet your customers and business partners at the exhbition of the combined event Battery Day NRW and Advanced Battery Power on April, 25-27, 2016 in Münster, Germany
Control 2016 brings together users from all over the world with the international market leaders and innovative suppliers of all QA related technologies, products, subsystems and complete solutions in hard and software.
The exceptional build quality, innovative product features, accuracy and smart controls allow for the safest and easiest stability testing. VP series 280, 280-T, 600, 600-T, 1300, 1300-T, 2000, 2000-T pharma test chambers.
Vötsch photostability testing cabinets (VP Series 250-L, 250-LT, 500-L, 500-LT) offer innovative product features, high accuracy, intelligent controls and an exceptional build quality.
The ZX74 series of decade resistance boxes are very high accuracy and stable six-dial instruments. The ZX90 series of decade resistance boxes comprise of 10 instruments to cover a resistance range.
In the ICH Guideline Q1B the methods for performing photostability tests are established with an irradiation dose of 1.2 million lxh and an integrated UV part of 200 Wh/m2.
Nacelle Systems Consultancy Ltd (NSC), UK chooses IMV Corporation for the supply of a 54kN Combo vibration test system to be installed in their Newry, N.I. test facility.
Vötsch's product list includes heating and drying ovens, explosion-proof ovens, sterilisers, clean room drying ovens and vacuum chambers ...
DE 6000 LCR meter features automatic L-C-R selection, a Sorting mode, and selectable test frequencies. Wide range of test frequencies: 100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz.
Time and frequency signals to your mission critical instrumentation systems with SyncServer S650 and improve security, accuracy and reliability of time services on your Enterprise IT network with SyncServer S600.
The new SyncServer S650 time and frequency Instrument provides unprecedented synchronization flexibility and performance using Microsemi FlexPortTM technology.
The new SyncServer S600 network time server with security-hardened NTP ReflectorTM technology improves the security, accuracy and the reliability of the time services on the network.
We perform precise, reliable and fast temperature calibration of heating and drying industrial ovens.
Easy integration of heating and drying oven in a your production line – Branch: automobile industry – Application: heat treatment of rubber / metal gaskets e.g. for vehicle gears.
Heating and drying oven VTU, controlled atmosphere – Branch: electronic (semiconductor production) – Application: tempering of SMD on a lead frame band.
Heating, drying oven VTU, controlled atmosphere – Heating and tempering of plastic sheets under an inert, protective gas atmosphere (N2) – Branch: plastics.
Vötsch heat treatment in controlled atmosphere – We offer customized solutions for heat treatment in controlled atmosphere e.g. under inert gas atmosphere.
Vacuum drying oven of cylindrical design – Application: baking out of temperature sensors under vacuum – Branch: aviation industry.
Vacuum Dryer – Drying of pharmaceutical active agents and end products – Branch: pharmaceutical industry.
The vacuum drying ovens VVT of Vötsch are remarkable for reduced drying times by optimal drying conditions for light, powdery products. Products from almost all branches of industry can be dried in a vacuum drying oven.
Vacuum heating and drying ovens for the gentle drying of temperature sensitive, easy decomposable goods and components with a complex geometry also available in explosion-proof design.
Chest oven TUHT for heating of flange wheels at 200°C. Branch: Metal industry.
Application: Chest oven for stress relieving of welded constructions, preheating of spinning nozzles. Branch: Metal industry, mechanical engineering, synthetic fibre production.
The chest oven VTUT of Vötsch is suitable for warming up and hot storing of machine components such as spinning nozzles and pumps. The construction of the device enables for easy charging by crane from the top.
The Vötsch chest ovens, series VTUT, are used for warming up and hot storing of machine components such as spinning nozzles and pumps, e.g. in the plastics industry.
Everything remains the same, only the name is changing. From 1 January 2016, please address all service requests and orders exclusively to Weiss Service.
Our drying ovens are suitable for variety of heating and drying processes in production and research. Should our extensive standard production program not meet your requirements, we will be pleased to consider a customised solution for you.
OCIAN – objective classification of instationary annoying noises - squeaking, rattling, groaning or cracking in a noise orchestra with background noises, as it is typical with street excitation.
IMV Corporation are pleased to announce that they have been selected to supply an i210/SA1M high performance Vibration Test System to CEJN AB, Sweden
Variable area flowmeter (rotameter) or high-precision mass flow meter: The user determines the device
The Crystal Instruments Spider-81C vibration test controller is designed to connect directly to an iPad with its built-in wireless router.
As of December 2015, Amtest will be the official sales and service representative of Vötsch Industrietechnik GmbH, manufacturer of environmental simulation test equipment and heating and drying ovens.
The 2015 digital mass flow meter generation offers a new level of ease of use: compact design with touch display and 24 Vdc, battery or USB supply for great flexibility.
Amtest is one of the most succesful sales and service partners of IMV in Europe.
Vibra acoustic sound measurement testing system, which acquires, analyses and evaluate vibration and sound signals and is therefore ideal for monitoring machine processes.
Spider-20 compact and powerful dynamic data acquisition system has been designed for a wide range of in field testing solutions.
Noise excitation is very important for checking the noise quality of vehicle components or complete vehicles. We measure stress scenarios at a reasonable price and with competence for any vehicle component.
By leveraging our expertise and technologies, Gems is able to deliver custom, engineered fluid handling systems, solutions and integrated sub-assemblies better than any other company in the world.
Precise measurement and stable regulation of behaviour are important if the quality of gas mixtures is to be maintained at a high level.
Measuring the consumption of expensive gases leads users to be economical with resources. Costs are promptly reduced, and the user knows exactly where, when and how much has been used.
Learn how to program Gems' M103 series compact meter / totalizer. Product Manager, Carl Schoenherr, demonstrates how to program.
Learn how to program Gems' DM21 series 1/8 DIN meter / totalizer. Product Manager, Carl Schoenherr, demonstrates how to program.
Gems Sensors Product Manager, Tim Kelley, demonstrates how to calibrate a 4-20 MA.
Bloodhound SSC is a unique, high-technology project to design and build a car that will break the 1,000mph barrier and set a new world land speed record. Designed and constructed in the UK, Bloodhound SSC includes components from Gems Sensors.
Measuring the consumption of expensive gases leads users to be economical with resources. Costs are reduced, and the user knows exactly where, when and how much has been consumed.
Choose from the largest selection of fluid sensors and controls. Gems has literally thousands of fluid sensors and controls from which we can develop application-specific assemblies.
Another milestone in the development of the smart product range is the new display option: our Vögtlin flow meters and controllers of the red-y smart series are available with an integrated display.
Mass flow meters and controllers "red-y industrial" series – Reliable technology and industry standard interfaces for rough environments.
Since 1986 Vögtlin flow experts ensure high-value products and solutions for your flow measurement and control tasks.
Reliable and accurate – Thermal mass flow meters and controllers – Compact design, simple installation, easy to service and maintain, 3-year warranty.
Independent digital convenience – Battery powered digital mass flow meters – Thermal mass measurement principle, extremely compact unit, CMOS sensor technology.
For a wide range of applications the thermal mass flow meters and mass flow controllers 'red-y for gasflow' will bring you a significant optimization and simplification of your processes.
Liquid flow meters, regulators and controllers, gas flow meters, regulators and controllers, pressure controllers.
High-precision thermal mass flow meters and controllers for gases made in Switzerland.
For 60 years, Gems Sensors and Controls has designed and manufactured a broad range of liquid level, flow and pressure sensors, switches, miniature solenoid valves, and preassembled fluidic systems.
Gems Sensors is helping Bloodhound SSC to break the 1,000mph barrier and set a new world land speed record.
Don’t settle for an off-the-shelf component when you need a partner that will bring ideas and complete solutions to the table. That is Gems Sensors and Controls.
Gems Sensors and Controls is a leading manufacturer of a broad portfolio of liquid level, flow sensors, pressure switches and sensors, miniature solenoid valves, solid-state electronics and fluidic systems.
Decades of application engineering experience has given Gems the knowledge required to deliver tailored products that measure up to today's most sophisticated and critical applications.
Gems designs and manufactures a broad portfolio of liquid level, flow and pressure sensors, miniature solenoid valves, and pre-assembled fluidic systems.
The IET Labs, GenRad 1482 standard inductors are the standard of choice in metrology labs. Used today by national metrology institutes and primary standards bodies around the world, these inductors have no peer or equivlent.
The IET Labs HARS-LX series is the world's highest accuracy continuously variable decade resistor for the most exacting calibration and test applications.
Product Manager, Tim Kelley, demonstrates how to properly wire and use Gems Sensors Warrick conductivity controllers.
Gems Sensors and Controls pressure switches cover a wide range of applications from 2 to 6000 psi (40 mbar to 400 bar).
IMV Corporation are the leading provider of Electrodynamic Vibration Test equipment and can offer a comprehensive range of solutions including both Multi Axis and traditional single axis test systems.
Functional noise is generated when components are moved by motor ...wobble, crackle, squeal, stall, rustle....
The World's most accurate 50Hz-20kHz Andeen Hagerling capacitance / loss1 bridge
The model 6010D is a fully automated resistance ratio bridge based on the direct-current-comparator (DCC) principle.
If high-accuracy measurement is needed for low resistance values, traditional multimeters should be replaced with other type of instruments and measurement principles.
Measuring limit - typically from mohm scale to kohm or even Mohm scale…
The IET Labs, LOM-510A micro-ohmmeter is a dedicated low resistance meter, useful wherever there is a need for measuring very low values of resistance.
Many of Andeen Hagerling bridges are used in the laboratories of universities and private firms – The research references in which AH bridges have been used.
Andeen Hagerling, Inc. – The manufacturers of the world's most accurate capacitance bridges and standards
The World’s Most Stable Capacitance Standards in commercial production – Unparalleled stability, resolution, linearity and accuracy.
MI designs, develops, manufactures and calibrates electrical metrology instruments - Quantum, DC, AC, Temperature Metrology and AC Power.
Measurements International supports leading edge industries / technologies by designing, developing, and manufacturing electrical metrology instrumentation providing the highest quality solutions in support of our customer’s organizations.
Measurements International has successfully delivered automated systems to every national laboratory responsible for maintaining reference values for temperature, resistance, voltage, current and power to the highest obtainable accuracy.
Measurements International (MI) designs, develops and manufacturers (Blue Box) electrical metrology instruments with the highest quality solutions in support of our customers organization.
Measurements International was founded in 1987 as a company with expertise in the science and engineering-intensive electrical metrology segment of the Test and Measurement Industry.
Measurements International is a Canadian-owned company in the science and engineering-intensive electrical metrology segment of the Test and Measurement Industry.
Since 1976, IET Labs, Inc. has had a long-standing commitment to conform the instruments and standards we offer to the customer's needs rather than to have the customer settle for what is available. Our ultimate goal is customer satisfaction
Besides the production of the QuadTech 1900 and 7600 LCR product lines (GenRad Digibridge Line: 1659, 1692, 1689, 1693, as well as 1910, 1920 and 7600 Plus LCR Meters), sales will become the task IET Labs, too, in the future.
IET Labs Inc. has acquired certain resistance products, from Tegam. This represents a significant portion of the products Tegam acquired from esi, Electro Scientific Industries, in 1993.
In 2000, IET Labs acquired the GenRad standards, impedance decades, megohmmeters, digibridges, audio and strobe lines and now continues to manufacture, service and support these product lines "In the Genrad Tradition..."
The IET Lab's mission is to help provide our customers with cost-effective solutions to their applications rather than have them settle for what is available. Our goal is to exceed your expectations.
The engineering experience of GenRad, esi and IET Labs, we have become the world's preeminent manufacturer of impedance instruments, offering from the most cost-effective to the most important electrical standards
IET Labs, Inc. warrants its products to be free from defects in material and workmanship and, when properly used, will perform in accordance with applicable IET specifications.
The IET Labs 1920 1MHz LCR meter is the most popular and designed to perform capacitance and impedance measurements on a variety of electronic components and materials over a frequency range from 20Hz to 1MHz.
The ease of use and user-friendly menu programming makes the IET Labs 7600Plus ideal for applications in product development, incoming inspections, or production line testing.
IET Labs manufactures a line of LCR meters, capacitance meters, impedance meters and inductance meters from the laboratory grade 1693 digibridge, to the 2MHz, 7600+ precision LCR meter, to the full featured and economical DE-5000 handheld LCR meter.
The GenRad 1863 Megohm meter is the choice for production and inspection tests on devices with resistances up to 20 Tohms. The GenRad 1863 will measure resistance at any of five test voltages of: 50V, 100V, 200V, 250V, and 500 VDC.
The IET Labs, GenRad 1864 megohm meter is the choice for more demanding applications. The test voltage can be set to any value from 10VDC to 109VDC in 1-volt steps and to 1090VDC in 10 volt steps.
The IET Labs 1865Plus megohm meter / IR tester, with digital display, is used for high accuracy measurements of insulation resistance on a wide variety of components, materials and electronic devices.
The LOM-530 is convenient single unit containing a complete set of (5) working standard grade resistors for complete calibration of micro-ohmmeters. The standard resistance values are those used by the LOM-510A micro-ohmmeter / milli-ohmmeter.
The IET high performance micro-/milli-ohmmeter that measures resistance as low as 1 microohm, with a basic accuracy of 0.02% and a 4½ digit display. The megohmmeters with a range of up to 200 teraohms have a history of proven reliability and utility
The GenRad 1689 precision impedance meter gives you the best performance for your most demanding applications whether they be production test, incoming inspection, component design and evaluation, process monitoring or dielectric measurement.
The IET Labs, GenRad digibridge line of LCR meters including the 1689 and 1693, the GR 1621, 1620 capacitance meters, and QuadTech 1910, 1920, 7400, 7600 and 7600Plus precision LCR meters.
The GenRad 1692 LCR Meter is an RLC passive component tester – Cost effective alternative to high-priced LCR testers. It's designed for the demanding applications in production testing, incoming inspection, component design and and evaluation.
The IET Labs, GenRad 1659 digibridge RLC tester is an easily programmable, microprocessor-based high performance passive component tester. It automatically identifies the type of component under test and measures in the proper range.
The GenRad 1689 precision impedance meter gives you the best performance for your most demanding applications whether they be production test, incoming inspection, component design and evaluation, process monitoring or dielectric measurement.
IET Labs manufactures the highest performing inductance bridges and meters… the Digibridge line; as well as the multifunctional, full featured, yet low cost DE-5000 LCR meter.
The World's only programmable inductance decade box – A broad range of programmable inductance decade boxes for applications requiring a programmable impedance unit, controlled manually and by a computer via an IEEE-488, RS-232 or BCD interface.
The IET Labs, GenRad 1492 model is an excellent choice for a highly accurate decade inductance substituter with a wide range. It is suitable for most laboratory and test applications.
Isolation solenoid valves – Gems solenoid valves are designed to your specifications for each unique application. Each series offers a broad range of constructon/performance options to build an endless array of configurations.
Miniature Cryogenic solenoid valves – designed and built for service down to -196°C, configured for liquid nitrogen (LN2), liquid carbon dioxide (LC02), and other extreme temperature media.
Highly adaptable design, latching valve, direct acting, high flow control, ruggedly designed solenoid valves, versatile miniature and sub-miniature solenoid valve, battery-powered applications, humidifier solenoid valve.
Gems Sensors and Controls designs and manufactures a complete range of 2-way normally open/closed, 2-way normally closed, and 3-way directional miniature solenoid valves, available in general purpose, cryogenic (-195,56°C) and isolation types.
Answering the demand for solid-state switches, Gems proudly offers the PS98. Built from our proven CVD and ASIC design, the PS98 solid state pressure switch offers greater accuracy in rough environments.
Gems Sensors ultra-long life vacuum and economical miniature vacuum switches.
Gems Sensors is a leading manufacturer of both adjustable pressure switches and factory set pressure switches.
Gems Sensors and Controls pressure switches cover a wide range of applications from 2 to 6000psi (40mbar to 400bar).
The 9000 CANBUS pressure transducer meets the demands of the test and measurement industry, including automotive and marine applications, with high levels of accuracy over a wide temperature range.
This large family of sensors includes models for positive pressures to 10,000psi (700bar), absolute vacuums, differential pressures, barometric pressure, low pressures (0 - 15psi / 0 - 1bar), and clean-in-place 3A sanitary applications.
Pressure transducers, thin film pressure transducers, sputtered thin film pressure sensor and transducer, heavy duty pressure transducers, pressure transmitter, liquid pressure sensor
OEM pressure transducers, fuel pressure sensors and submersible pressure transducers, absolute pressure transducers.
Gems Sensors provides the most stable pressure transducer and pressure switch sensors on the market today by combining advanced sensing technology with highly automated and revolutionary manufacturing methods.
Modern flowmeters for gases and liquids - The Q-Flow line of Vögtlin Instruments. Compact and slim design, customized versions available.
Suitable devices for your flow application – The V-Flow line of Vögtlin Instruments
Thanks to intelligent device monitoring, the software is a perfect service and analysis tool, e.g. to check and adjust settings.
International Exhibition for Automotive Test, Evaluation and Quality Engineering, 16. – 18.06.2015, Messe Stuttgart
An energy saving ECO-Shaker from the range of Japanese IMV brand has been selected and installed for our multinational client engaged in the manufacturing of electronic automotive devices.
The exhibition for the car body process chain. From concept to final assembly. From 9-10 June 2015 in the Exhibition Centre Nuremberg, Germany
Installation requirements vibration systems: power supply, pressure air supply, environment, sables and hoses, preliminary work, additional points that might be relevant during the planning and should be considered
ECO shaker offers energy savings up to 80% depending on the load under which the equipment is operated. The smaller the load, the more energy can be saved compared to a conventional dynamic test equipment.
Weiss service on site – We are a competent partner for optimal maintenance of your devices and systems after delivery.
At a very early stage, the specialist visitors gain insights into the production and test engineering spheres of the future. In this, Control relies on the transfer of knowledge and technology between research, development and the users in industry.
We at Weiss possess the environmental simulation technology for all that concerns the automobile: Standard testing and special testing systems for:
The R&D elite of the market: The CNBC RQ 50 – most innovative companies in the market – one of the Microsemi
You do not have to make major investments to promote your company's R&D activities. Our climate chamber renting concept provides you with advantageous renting opportunities and good price for the value.
You can optimize your products to comply with requirements and standards by performing development supporting tests.
The test system consist of an electrodynamic shaker, an amplifier and a vibration controller and may optionally include a shaker table or a multi-channel measurement data collecting system and a special software for analysis.
A Microsemi Corporation bejelentette, hogy leányvállalata sikeresen beolvadt a Symmetricom, Inc. társaságba. As a result of the acquisition, Microsemi now offers the industry's largest and most complete timing product offering.
Improves Cesium reference performance by filtering phase noise and Allan deviation – 4145C Quartz ultra clean-up oscillator
We guarantee the reproducibility and reliability of our test results. If you rely on us, our results will convince you.
THP Systems Ltd announces expansion of IMV Sales Channels in Europe.
IMV Corporation announce a further two customer seminars that will be held on the following dates at their Letchworth Technical Centre.
The SyncServer S350TM provides unsurpassed NTP performance for the IT network while being the most versatile time server in the world for traditional time and frequency applications.
Why do we need artificial vibration generation? Let's learn purposes and importance of vibration testing.
Temperature and climate working range have been designed to fulfil all relevant standards such as DIN, EN, ISO, MIL, IEC, DEF and ASTM.
You can make the decision making process of your developers and investors easier, facilitate sales agents' business activities and earn your customers' trust. Take a look at the list of our test equipment available to let (download data sheets).
SyncServer S250 is a GPS NTP server with multiple and versatile timing configurations. It provides ultra precise time and frequency outputs and redundant back-up, essential for Next Generation IT networks.
Computer networks – Time synchronisation to the nearest millisecond using the NTP protocol. A time server receives the exact time directly from cesium, rubidium atomic clocks located on GPS satellites and transmits it to the computers on a network.
Application timing is only as good as the time available at your network's PTP Grandmaster – and only if your applications can sync to that time – Sync Linux application
Microsemi, the world leader in precise time solutions, sets the world's standard for time.
The 4091A is a 1U rackmount fault sense switch that accepts two RF inputs and produces eight outputs (chosen from the two inputs). In Auto mode, the unit automatically switches upon failure of the selected input.
Please provide your data and a wish list of parameters of the intended products.
We introduced and operate a quality management system laid out in compliance with the EN ISO 9001:2008 standard. In providing services we aspire to fully satisfy our customers expectations.
One Box Solution – The innovative 5120A combines sophisticated timing technologies into a single advanced instrument, which integrates all required measurement functionality into a one box solution, requiring no calibration or configuration
From minimal infrastructure investment to missile launches we offer GPS and time code instrumentation solutions for multiple applications and a wide customer base.
Microsemi's GPS In-line lightning arrestors will protect your systems from lightning damage.
With timing, frequency and synchronization solutions so precise they help define the world’s standards – Microsemi
Our company is engaged in the sales, installation, commissioning, repair, maintenance, calibration and renting of new and used high-precision laboratory equipment, instruments, parts and accessories.
Microsemi 5071A primary frequency standard delivers unsurpassed accuracy, stability and reliability for the most demanding laboratory and field applications.
Your IT network deserves the highest performing, most flexible, easiest to manage, most secure and provably accurate network timekeeping – Microsemi's network time servers
The programmable high-performance Microsemi 3120A Phase Noise Test Probe measures the amplitude, phase, and frequency stability of RF sources and two-port devices at frequencies from 0.5 MHz to 30 MHz
The 9611B switch and distribution system is an intelligent switching, monitoring and distribution system, packaged in a 1U rack-mount chassis.
The most challenging scientific applications require the most stable performance – Microsemi's MHM 2010 Active hydrogen maser
The Cs4000 meets the challenges of laboratory standards, satcom terminals, mobile communications systems and a wide variety of test and measurement applications.
Faster, more accurate, more secure, increased redundancy, and maximum reliability – these features all contribute to higher levels of performance and assure optimal integrity within the Next Generation IT network – SyncServer S300
From minimal infrastructure investment to missile launches we offer GPS and time code instrumentation solutions for multiple applications and a wide customer base
The Microsemi 8040C provides a stable and accurate frequency reference with multiple output signal formats in an easy to install 1U rack mountable chassis.
Microsemi offers a variety of products to complete your GPS-based system that are designed to support the unique requirements of a communication network.
Our company is in the business of distribution of high-precision measuring instruments and testing equipment in the Central European region.
We proudly share our knowledge and experience with our customers and partners.
Microsemi Auxiliary output generator, designated the AOG-110, solves performance and capability issues associated with the use of high stability frequency standards.
Phase noise measurements – Multiple timing technologies integrated in a single instrument
The 4033A provides fifteen outputs from a single input for distributing standard clock and other pulse rate signals in laboratory, factory, and test and measurement environments.
Domain Time II Software – Synchronization Software Suite – Precise Time Synchronization for the Entire Enterprise
Microsemi is the world’s leading source of highly precise timekeeping technologies, instruments and solutions
Amtest Service Excelence service contract provides effective and uninterrupted operation of your test equipment. It provides immediate availability to Amtest Service Centre and responsible service engineer.
Our Hydrogen, Cesium and Rubidium standards, and quartz oscillators support more military communications, satellite ground stations, and test & measurement applications than any other precision frequency references in the world.
Do you need information? Would you like some repairs? Do you need a customised quotation? Do not hesitate to contact us.
The SyncServer S100 is a GPS network time server designed for small and medium sized enterprises that require extremely accurate and reliable time delivered to their clients, servers and workstations from a highly-responsive NTP service.
The 4037A provides sixteen outputs from a single input for distributing signals communication systems, satellite earth stations, test facilities and engineering laboratories.
Microsemi's next generation of GPS NTP/PTP network time synchronization products with atomic clock accuracy ensure that time is synchronized and accurate throughout your IT enterprise network.
Verifiable Audit Trail of Time Synchronization on Your Network – Audit server for Domain Time II software
The 5087B is versatile, economical solution for standards laboratories that need simultaneous calibration of multiple test equipment.
High value, network managed receiver – Microsemi's XL GPS Time and frequency receiver
The 4036B provides fifteen outputs from a single input for distributing RF signals in laboratory, factory, and test and measurement environments where low phase noise and high channel isolation are required.
Microsemi designs, manufactures and markets hydrogen, cesium and rubidium standards, and quartz oscillators in numerous configurations for multiple markets and applications.